Crucial Technology CT12864X335 1GB PC2700 DDR 333MHZ 200PIN SODIMM 2.5V CL2.5 Unbuffered Non-ECC Upgrade Memory Module
Monday, October 5th, 2009 at
4:40 pm
1GB PC2700 DDR 333MHZ 200PIN SODIMM 2.5V CL2.5 UNBUFF NON-ECC
Related posts:
- Crucial Technology CT12864Z335 1GB 184-Pin PC2700 333Mhz DIMM DDR RAM Memory 1GB PC2700 DDR 333MHZ 184PIN DIMM 2.5V CL2.5 UNBUFF...
- Crucial Technology CT25664AC800 2GB 200-pin SODIMM DDR2 PC2-6400 Memory Module 200-pin SODIMMs are used to provide DDR and DDR2...
- Crucial CT2CP25664AC667 200-Pin SODIMM DDR2 PC2-5300 CL=5 Unbuffered NON-ECC DDR2-667 1.8V 256Meg x 64 2GBx2 4GB Kit Micron Technology is one of the world’s leading providers...
- Crucial 2GB 667 Mhz CT25664AC667 DDR2 200-Pin SODIMM Laptop Memory From the Manufacturer A small outline dual inline memory...
- Crucial CT2KIT25664BC1067 4GB 204-PIN PC3-8500 SODIMM DDR3 Memory KIT (2GBx2) In short, 204-pin small outline dual inline memory modules...
Related posts brought to you by Yet Another Related Posts Plugin.
Tagged with: 2.5V • 200Pin • 333Mhz • CL2.5 • Crucial • CT12864X335 • PC2700 • SODIMM • Technology • Unbuffered
Filed under: computer memory
Like this post? Subscribe to my RSS feed and get loads more!
i have a powerbook G4 1.5 GHZ and this is exactly what i needed. its working great so far!
I put this in my Dell inspiron and it instantly recognized it. I went throught the whole should I order the memory from Dell thing. Kingston or PNY etc. Finally just bought this and am totally satisfied.
I replaced my 1GB and 512MB Corsair Value Ram sticks with these Crucial 1GB sticks in my HP ZD7188cl notebook.
With my previous RAM, my system would shutdown randomly and without warning. The sticks were the same brand, just different capacities. It was infuriating when in the middle of working on a document, or on the web. I even swapped the sticks in the slots, but I still had the same problem. I just never knew when the shutdown problem would strike next. Even when I wasn’t running any applications, or if I was out of the room, it would shut down. It wasn’t a system stress issue.
I had to pull the 512MB stick out and live with 1GB of RAM to have a stable system. This has worked flawlessly for the six months since I tried it. The 512MB worked fine with the HP 256MB RAM that came with the system, but 768MB just wasn’t enough for what I do. Something was going on, but I could not duplicate the problem or pinpoint the flaw.
Now I have 2GB of Crucial RAM and it hasn’t tripped once. I also upgraded the 4200 RPM 80GB Toshiba HD with a Seagate 7200 RPM 100GB HD (see my review). The 3.2GHz P4 has always been a trooper, but the RAM and HD held it back. Now it’s like having a new system.